10. If your LCD error message was repeat paper jam messages, for example [Repeat Jam Front/Rear],
and you removed the paper support, put it firmly back in the machine. Make sure you fit the paper support
into the channels.
11. Slowly push Tray #1 completely into the machine.
12. Reconnect the power cord.
If there is a repeat paper jam, a small piece of paper may be stuck in the machine.
See Related Information: Remove Paper Scraps.
Related Information
• Printer Jam or Paper Jam
Related Topics:
• Error and Maintenance Messages
• Remove Paper Scraps
250
To Next Page
Loading...
