Brother KE-430C - Work Clamp Arm Mechanism; 435 C, 436 B, 436 C, 484 C)

3. DISASSEMBLY
３ - ５ . Work clamp arm mechanism (KE-434B, 434C, 435B, 435C, 436B, 436C, 484C)
KE-434B, 434C Solenoid specification
1. Set screw
2. Ne
edle
3. Needle bar thread guide
4. Bolts [2 pcs: pneumatic spec. only]
5. Cylinder support
[pneumatic spec. only]
6. Bolts [2 pcs]
7. Work clamp arm assy
8. Bolts [2 pcs]
9. Feed plate
3277Q
10. Feed bracket cover
KE-430B, 430C series
27