Brother KE-430D - Setting the Work Clamp Mode

2. FUNCTION SETTINGS
2-5. Setting the work clamp mode
Of CAUTION
0 X X·SCALE
-
o fvv-scALE
oE) SPEED
Ot!DiJCOUNTER
0 .1_ SPRIT No.
ill B!® ®~
-88888
The work clamp/button clamp operating mode can be switched as follows using the setting for memory switch No. 050.
Setting range
Setting items
1
Single pedal
Work clamp is raised
automatically.
2
Work clamp is raised by depressing the foot switch.
3
Work clamp is raised automatically, then it is lowered by depressing the
Two pedals
work
clamp switch.
4
Work clamp is kept lifted while the work clamp pedal is depressing the
work
clamp switch.
10
KE-4300, BE-4380
4556Q
From the library of: Superior Sewing Machine & Supply LLC