3. USING
CF
CARDS
3.
USING CF CARDS
3-1. Notes on handling CF cards (purchase
at
local re1ailers)
• Use only 32MB, 64MB, 128MB
or
256MB CF cards.
• Do not disassemble
or
alt~r
CF cards.
• Do not bend, drop, scratch
or
place heavy objects on top
of
the CF cards.
• Do not allow the CF cards to become wet, such as with water, oil, solvents, drinks
or
any other liquids.
•
Do not use
or
store the CF cards
in
a locations exposed to strong static electricity
or
electrical interference.
• Do not use
or
store the CF cards
in
a locations exposed to vibrations
or
impacts, direct sunlight, extreme dust (or lint}, high
temperatures, high humidity, severe temperature fluctuations,
or
strong magnetic forces (such as from speakers}.
• While data is being read
in
from
or
written to the CF cards,
do
not allow the machine to be exposed to vibrations or impacts,
and do not attempt to remove the CF cards from the machine.
• Data on the CF cards may be lost
or
damaged due to some malfunction
or
accident.
We
recommend backing up important
data.
• Only insert
or
remove CF cards while the machine power is turned off. .
•
The CF cards that you purchased is already formatted.
We
recommend that the CF cards
not
be reformatted.
• The recommended CF cards are commercially-available ones from SanDisk
or
HAGIWARA SYS-COM. CF cards from
other manufacturers can be used, but different formatting methods may mean that reading
or
writing to such cards may not
be
possible.
For additional information, refer to the instruction manual included with the CF cards that you have purchased.
*This
product is compatible with CF cards that have been formatted using the FAT16 method. Cards that have been
formatted using the FAT32 method cannot be used.
*
CF™
is
a trademark
of
SanDisk Corporation.
*
All other company and product names mentioned
in
this instruction manual are trademarks
or
registered trademarks
of
their respective companies. However, the explanations for markings such as TM are not clearly described within
the text.
3-2. Structure
of
a CF card folder
\BROTHER\JSM\ISMSYS\ISM01 MN. MOT
\BROTHER\ISM\ISMDAOO\ISMMSW.SEW
(*1} \ISMUPG.SEW
\ISMHST.SEW
\ISMS0200.SEW
\ISMS0201.SEW
\ISMS0202.SEW
: Control program
: Memory switch data
: User program data
: Error
log data
:
Additional sewing data Program No. 200
: Additional sewing data Program No. 201
: Additional sewing data Program No. 202
I
*1
The underlined portion
of
the name
of
the \BROTHER\ISM\ISMDAQQ. folder for additional sewing data can be changed by
changing the setting for memory switch No. 752. Change the
folder name
if
you would like to store additional sewing data
for different sewing machines on a
single CF card.
4726Q
18
KE·430D, BE·438D
To Next Page
Loading...
