<Grease application locations>
4534Q
• Left-hand thread
8.
Applying
grease (When "GREASEUP" appears)
Turn the machine pulley until the
screw (1)
can
be seen.
Be careful not to drop the screw (2)
when removing
it.
<Resetting the grease
up
counter>
(1)
(3}
(4}
••
;:.
-
EJ§)§)EJIJ
(5)
(2)
(6)
(7)
4536Q
4535Q
Once the grease has been applied, follow the procedure
below to reset the cumulative number of stitches between
grease applications.
1.
Tum
on
the power switch. "GrE"
and
"AS.UP" will flash
in
the program
No.
display (1) and the menu display
(2)
and
the buzzer will sound.
2.
Press the RESET key (3). The program No. display
(1)
and
the
menu
display (2) will return
to
their normal
displays.
3.
While pressing the TEST key (4), press the
ll
key
(5).
"GrS" will appear
in
the program
No.
display
(1),
and
the cumulative number
of
stitches until greasing
is
required will appear
in
the menu display (2)
in
units of
100,000 stitches.
(The number
of
stitches will be displayed
in
all seven
digits of the program No. display (1) and menu display
(2)
in
units of 100 stitches while the • key (6) is being
pressed.)
4.
Press the T key (7). The cumulative
number of
stitches will
be
reset
to
"0000".
5.
Press and hold the RESET key (3) for 2 seconds or
more. (This completes the reset procedure.}
6.
When you press the TEST key (4), the displays will
return to their normal displays.
KE-4300, BE-4380
83
To Next Page
Loading...
