8. MAINTENANCE
58KE-430F, BE-438F
8-2. Cleaning the control box air inlet ports
Use a vacuum cleaner to clean the filter in the air inlet ports
(2) of the control box (1) at least once a month.
8-3. Draining the oil
1. Remove and empty the waste oil container (1) whenever
it is full.
2. After emptying the waste oil container (1), screw it back
into its original position.
* Check that the felt (2) is inside the oiler (1).
8-4. Cleaning the eye guard
Wipe the eye guard clean with a soft cloth.
NOTE:
Do not use solvents such as kerosene or thinner to clean
the eye guard.
8-5. Checking the needle
Always check that the tip of the needle is not broken and
also the needle is not bent before starting sewing.
8-6. Lubrication
Carry out the lubrication referring to “3-12. Lubrication”.
2311B
2309B
2310B
2457B
To Next Page
Loading...
