Brother KE-430F Series - Maintenance Procedures; Applying Grease to Work Clamp (KE-430 F); Applying Grease When GREASEUP Appears

8. MAINTENANCE
60KE-430F, BE-438F
<Applying grease>
Use Brother-specified “Grease unit (SB1275-001)”.
1. Removing the grease assembly
1. Remove the four screws (1), and
then remove the rear cover (2).
2. Remove the grease assembly (3)
from inside the rear cover (2).
2. Using the tube
2313B
Use in “B. Applying grease to the rock gear shaft F”.
2458B