KE-430F, BE-438F
iv
[3] Warning labels
The following warning labels appear on the sewing machine.
Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are
difficult to read, please contact your nearest Brother dealer.
1
2
Touching areas where high voltages are present can result in severe injury.
Turn off the power before removing the cover.
3
*Safety devices
Eye guard
Finger guard
Solenoid cover
Thread take-up cover
Side cover
Rear cover, etc.
6
Be sure to connect the ground. If
the ground connection is not
secure, you run a high risk of
receiving a serious electric shock,
and problems with correct
operation may also occur.
7
Direction of operation
4
Be careful to avoid injury from the moving thread
take-up.
8
Do not hold, otherwise
problems with
operation or injury may
occur.
5
Be careful not to get your hands caught when
returning the machine head to its original position
after it has been tilted.
9
To Next Page
Loading...
