Brother Laura Ashley Innov-ís NX2000 User Manual

Other manuals for Brother Laura Ashley Innov-ís NX2000

Instruction Manual40 pages

• S

  Shannon ScottAug 15, 2025

  Why does the upper thread keep breaking on my Brother Sewing Machine?

  

  Same questionReply

  • A

    Amy HurstAug 15, 2025

    If the upper thread breaks on your Brother Sewing Machine, several factors could be the cause. First, ensure the machine is threaded correctly, paying attention to the spool installation, spool cap, and needle bar thread guide. Remove any knots or tangles in the thread. The thread might be too thick for the needle, so check the fabric, thread, and needle combination table. Also, the upper thread tension might be too strong and require adjustment. A bent or blunt needle should be replaced, and an incorrectly installed needle should be reinstalled properly. Finally, scratches on the needle plate, presser foot, or race (bobbin case) may require replacement or consultation with an authorized dealer.

    

    Reply
• A

  Ashley CabreraAug 18, 2025

  Why is my Brother Laura Ashley Innov-ís NX2000 skipping stitches?

  

  Same questionReply

  • A

    Andrew GrantAug 18, 2025

    If your Brother Sewing Machine is skipping stitches, it might be due to incorrect threading. Double-check the threading procedure and rethread the machine. The thread or needle may not be suitable for the fabric, so consult the fabric, thread, and needle combination table. A bent or blunt needle should be replaced with a new one, and an incorrectly installed needle should be reinstalled correctly. The needle itself may be defective and need replacing. Also, check for dust or lint under the needle plate and remove it with the brush.

    

    Reply
• T

  tuckererikaAug 21, 2025

  What to do if the bobbin thread breaks on my Brother Sewing Machine?

  

  Same questionReply

  • J

    Jennifer SnyderAug 21, 2025

    If the bobbin thread breaks on your Brother Sewing Machine, make sure the bobbin is set correctly. If the bobbin has scratches or doesn’t rotate properly, replace it. If the thread is tangled, use scissors to cut and remove it from the race (bobbin case).

    

    Reply
• J

  John CarrollAug 25, 2025

  Why isn't the fabric feeding through my Brother Laura Ashley Innov-ís NX2000?

  

  Same questionReply

  • I

    Ian McdowellAug 25, 2025

    If the fabric does not feed through your Brother Sewing Machine, ensure the feed dogs are raised by pressing the drop feed key. If the stitches are too close together, lengthen the stitch length. Using the wrong presser foot can also cause this issue, so attach the correct presser foot. Replace a bent or blunt needle. If the thread is tangled, use scissors to cut the tangled thread and remove it from the race (bobbin case).

    

    Reply
• T

  Tina PalmerAug 27, 2025

  Why is my Brother Laura Ashley Innov-ís NX2000 not operating?

  

  Same questionReply

  • A

    Andrew CameronAug 27, 2025

    If your Brother Sewing Machine does not operate, ensure a pattern is selected. Press the “Start/Stop” button. Check that the main power switch is turned on. Lower the presser foot. If the foot controller is connected, either remove it or use it to operate the machine if the “Start/Stop” button was pressed.

    

    Reply
• R

  Richard AndersonAug 30, 2025

  What to do if I cannot thread the needle on my Brother Sewing Machine?

  

  Same questionReply

  • A

    Angela MosleyAug 30, 2025

    If you cannot thread the needle on your Brother Sewing Machine, make sure the needle is in the correct position by pressing the “Needle Position” button to raise the needle. This ensures the threading hook passes through the eye of the needle. Also, verify that the needle is installed correctly.

    

    Reply
• T

  Timothy Evans DVMSep 2, 2025

  Why does the needle keep breaking on my Brother Laura Ashley Innov-ís NX2000 Sewing Machine?

  

  Same questionReply

  • B

    Brooke CrosbySep 2, 2025

    If the needle breaks on your Brother Sewing Machine, it could be due to several reasons. Make sure the needle is installed correctly and that the needle clamp screw is tightened. A bent or blunt needle should be replaced. Ensure that the thread and needle are suitable for the fabric you are sewing. The wrong presser foot could also cause the needle to break, so attach the correct one. Adjust the upper thread tension if it is too strong. Avoid pulling the fabric during sewing, and ensure the spool is installed correctly. Scratches on the needle plate, presser foot, or race (bobbin case) may require replacement or consultation with an authorized retailer. Finally, the needle itself may be defective and need replacement.

    

    Reply
• A

  Aaron AndrewsSep 5, 2025

  Why is the fabric puckering when I sew with my Brother Sewing Machine?

  

  Same questionReply

  • V

    Victoria Williams MDSep 5, 2025

    If the fabric puckers when using your Brother Sewing Machine, check that both the upper and bobbin threads are correctly threaded. Also, ensure the spool is installed correctly. The thread or needle may not be appropriate for the fabric, so check the fabric, thread, and needle combination table. Replace a bent or blunt needle. If you are sewing lightweight fabrics, shorten the stitch length. Incorrect thread tension can also cause puckering, so adjust it accordingly. Finally, make sure you are using the correct presser foot.

    

    Reply
• M

  Michael MarshallSep 8, 2025

  Why is my Brother Laura Ashley Innov-ís NX2000 Sewing Machine making a high-pitched sound?

  

  Same questionReply

  • C

    Corey NolanSep 8, 2025

    If your Brother Sewing Machine is making a high-pitched sound while sewing, it could be due to dust or lint caught in the feed dogs, so remove it. Pieces of thread might be caught in the race (bobbin case); clean the race (bobbin case). The upper threading might be incorrect, so rethread the machine. Scratches on the race (bobbin case) may require replacement or consultation with an authorized dealer.

    

    Reply

Brother Laura Ashley Innov-ís NX2000 Specifications

General

Brand	Brother
Model	Laura Ashley Innov-ís NX2000
Category	Sewing Machine
Language	English

Summary

Chapter 1 Getting Ready

Page: 17

Turning the Machine On and Off

Instructions for powering the sewing machine on and off, including important safety warnings.

Understanding the LCD Screen

Details about the Liquid Crystal Display (LCD) screen, its layout, and display precautions.

Lower and Upper Threading Procedures

Step-by-step guide for winding the bobbin and threading the upper thread for sewing.

Changing the Sewing Machine Needle

Procedures for checking, replacing, and selecting the correct sewing machine needle.

Chapter 2 Sewing Basics

Page: 37

Basic Sewing Operations

Covers sewing a stitch, using the foot controller, and handling fabric for basic sewing.

Adjusting Stitch Settings

How to adjust stitch width, stitch length, and thread tension for optimal sewing results.

Utilizing Machine's Useful Functions

Explains features like automatic reinforcement stitching, thread cutting, pivoting, and fabric sensor.

Chapter 3 Utility Stitches

Page: 49

Selecting Utility Stitches

Covers stitch selection screens, choosing stitches, and using the sewing type selection key.

Sewing Utility Stitches

Detailed instructions for sewing specific utility stitches like straight, zigzag, and overcasting stitches.

Chapter 4 Character/Decorative Stitches

Page: 103

Selecting Stitch Patterns

Information on stitch selection screens and how to choose decorative and alphabet patterns.

Sewing Stitch Patterns

Instructions for sewing attractive finishes, basic sewing of decorative stitches, and pattern adjustment.

Editing Stitch Patterns

How to modify stitch patterns, including size, mirror images, and elongation.

Combining Stitch Patterns

Techniques for combining multiple stitch patterns for unique designs and effects.

Using the Memory Function

Details on saving and retrieving stitch patterns in the machine's memory or to a computer.

Chapter 5 MY CUSTOM STITCH

Page: 127

Designing a Custom Stitch

Steps involved in creating a new stitch design using the MY CUSTOM STITCH™ feature.

Entering Stitch Data

How to input stitch design data, including key functions and grid manipulation.

Using Stored Custom Stitches

Procedures for saving and retrieving custom stitches from the machine's memory or computer.

Chapter 6 Appendix

Page: 139

Care and Maintenance

Instructions for cleaning the machine's LCD, casing, race, and bobbin case.

Adjusting the Screen Settings

Steps to adjust screen visibility and troubleshoot touch panel issues.

Troubleshooting Common Problems

Solutions for common problems encountered during sewing, organized by issue.

Understanding Error Messages

Explains various error messages displayed by the machine and how to resolve them.

Machine Specifications

Technical details and dimensions of the sewing machine.

Upgrading Machine Software

Guide for downloading and installing software upgrades for the sewing machine.

Stitch Setting Chart

A comprehensive chart detailing stitch names, settings, presser feet, and applications.

Related product manuals

Laura Ashley Innov-is NX800

16 pages

Brother LS-30

82 pages

Brother lx3125

96 pages

Brother LX2500

166 pages

Brother LS2400

96 pages

Brother lx3014

96 pages

Brother LB5500

104 pages

Brother LS-2020

20 pages

Brother LS-2125

67 pages

Brother LS-2220

67 pages

Brother LS-1717

82 pages

Brother LX-3125

68 pages