Brother MFC-255CW User Manual

Wireless Configuration for Macintosh using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW,
DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW)
89
5
For example:
j To communicate with the un-configured wireless machine, temporarily change the wireless settings on
your computer to match the machine’s default settings shown on this screen. Check the box after you
confirm these settings. Check the box after you confirm the wireless setting, and then click Next.
Note
You can temporarily change the wireless settings on your computer, following the steps below:
1 Click the AirPort status icon in the menu bar.
2 Select SETUP from the pop-up menu.
3 Your wireless network is connected successfully.
Network name:(SSID, ESSID)
Communication Mode Authentication method Encryption mode Network key
Ad-hoc Open system WEP
NONE —
Network name:(SSID, ESSID)
HELLO
Communication Mode Authentication method Encryption mode Network key
Ad-hoc Open system WEP 12345

Brother MFC-255CW Specifications

General

Device Type	Print server
Network Protocol	TCP/IP
Wireless Standard	IEEE 802.11b, IEEE 802.11g
Security	WEP, WPA-PSK, WPA2-PSK
Compatible Operating Systems	Mac OS X
Interface	Ethernet, USB, Wireless