USING THE BROTHER CONTROL CENTER
3 - 12
Scan to OCR (Word Processor)
To access Scan to OCR Configurations screen
1
Load your original in the ADF. The Brother Control Center
screen will pop up.
2
Right-click the word processor application button and click on
Configuration
. Click the Modify Settings button to view the
configuration screen of the Control Center.
3
To save your settings, click OK.
—OR—
To go back to the factory default settings, click the Restore
Defaults button.
Scanner settings
From the pull-down list, select the scanning mode that is appropriate
for the type of file: Faxing, Filing and Copying; Text for OCR;
Photos; Photos (High Quality); Photos (Quick Scan); Custom;
Draft Copy or Fine Copy.
To change any of the settings for this mode, click Modify Settings.
To Next Page
Loading...
Need help?
General
