Brother MFC-440CN - Speaker Volume; Setting Daylight Savings Time

Chapter 3
26
Speaker Volume 3
You can choose a range of speaker volume
levels, from High to Off.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Volume.
Press OK.
d Press a or b to choose Speaker.
Press OK.
e Press a or b to choose Low, Med,
High or Off.
Press OK.
f Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook or Speaker Phone.
a Press Hook or Speaker Phone.
b Press d or c .
This setting will stay until you change it
again.
c Press Hook or Speaker Phone.
Note
(MFC-665CW only)
You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM’s) by pressing d or c .
Setting Daylight
Savings Time 3
You can set the machine to change for
daylight savings time. It will reset itself
forward one hour in the Spring and backward
one hour in the Autumn. Make sure you have
set the correct date and time in the
Date/Time setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Daylight Save.
Press OK.
d Press a or b to choose Off (or On).
Press OK.
e Press Stop/Exit.