TAD (TELEPHONE ANSWERING DEVICE) 7 - 2
Recording TAD Outgoing Message
Recording the TAD Outgoing Message (Msg Ctr OGM) is the first
step you need to follow before you can turn on the TAD. Make sure
your OGM is less than 20 seconds long.
1
Press Menu/Set, 2, 7, 1.
The LCD prompts you to choose an OGM.
2
Press ▲ or ▼ to select Msg Ctr OGM (or F/T OGM).
Press
Menu/Set.
3
Press ▲ or ▼ to select Record MSG.
Press
Menu/Set.
4
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal.
5
Replace the handset.
The TAD will play your OGM.
6
Press Stop/Exit.
Listening to Outgoing Message (OGM)
1
Press Menu/Set, 2, 7, 1.
2
Press ▲ or ▼ to select Msg Ctr OGM (or F/T OGM).
Press
Menu/Set.
3
Press ▲ or ▼ to select Play MSG.
Press
Menu/Set.
Adjust the volume by pressing Volume or .
4
Press Stop/Exit.
This is the only setting you can select if you want to turn on
the TAD.
To Next Page
Loading...
Need help?
General
