Sending a fax
33
5
Faxing from the scanner glass5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.
You cannot send multiple pages for colour faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
a Press (Fax).
b Load your document face down on the
scanner glass. (See Using the scanner
glass on page 11)
c Enter the fax number using the dial pad
or Speed Dial.
Note
You can preview a fax message before
sending it by pressing Fax Preview. For
details, see How to preview an outgoing
fax on page 68.
d Press Mono Start or Colour Start.
If you press Mono Start, the
machine starts scanning the first
page. Go to step e.
If you press
Colour Start
, the
machine starts sending the document.
e Do one of the following:
To send a single page, press
2
to
choose
No
(or press
Mono Start
again).
The machine starts sending the
document.
To send more than one page, press
1 to choose Yes and go to step f.
f Put the next page on the scanner glass.
Press OK.
The machine starts scanning the page.
(Repeat steps e and f for each
additional page.)
Faxing Letter size documents
from the scanner glass 5
When documents are Letter size, you need to
set Scan Size to Letter. If you do not, the side
portion of the faxes will be missing.
a Press (Fax).
b Press a or b to choose Scan Size.
c Press d or c to choose Letter.
Note
You can save the setting you use most
often by setting it as default. (See
page 38.)
Colour fax transmission 5
Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the memory.
When you send a colour fax, the machine will
send it in real time (even if Real Time TX is
set to Off).
Cancelling a fax in progress 5
If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
To Next Page
Loading...
Need help?
General
