Brother MFC-7240 - Separation Pad ASSY

3-42
Confidential
9.18 Separation pad ASSY
(1) Remove the taptite cup B M3x8 screw, and remove the front plate spring ASSY and the
separation pad ASSY.
(2) Push the both side arms of the separation pad holder inside to release the two bosses,
and remove the separation pad holder from the document chute upper ASSY. Then
remove the separation pad spring from the separation pad holder.
Fig. 3-26
Front plate spring
ASSY
Document chute upper ASSY
Separation pad spring
Separation pad ASSY
Taptite cup B M3x8
Separation pad holder
Bosses