Brother MFC-7240 - Inner Chute Cover

3-51
Confidential
9.25 Inner chute cover
(1) Disconnect the speaker harness from the main PCB ASSY.
(2) Remove the two taptite bind B M4x12 screws. And release the six hooks, and hold up
the front side of the inner chute cover, and then slide it in the direction of the arrow to
remove.
Fig. 3-37
Harness routing : Refer to "12. Speaker unit".
Hook
Hook
Inner chute cover
Hook
Hooks
Taptite bind B M4x12
Speaker harness
Main PCB ASSY
Speaker
harness