Brother MFC-7240 - Inner Chute ASSY

3-52
Confidential
9.26 Inner chute ASSY
(1) Pull down both side green envelope levers of the fuser unit.
(2) Remove the two taptite bind B M4x12 screws, and remove the inner chute ASSY from
the machine.
Fig. 3-38
(3) Release the hook of the eject pinch roller L ASSY, and open the eject pinch roller L ASSY
at an angle of 80 degrees. And release the boss A, and then release the boss B from the
guide to remove the eject pinch roller L ASSY from the inner chute ASSY. (2 places)
(4) Release the hook of the eject pinch roller R ASSY, and open the eject pinch roller R ASSY
at an angle of 80 degrees. And release the boss C, and then release the boss D from the
guide to remove the eject pinch roller R ASSY from the inner chute ASSY. (2 places)
Fig. 3-39
Taptite bind B M4x12
Inner chute ASSY
Green envelope lever R
Green envelope lever L
Fuser unit
Fuser unit
Inner chute ASSY
Eject pinch roller L ASSY
Eject pinch roller R ASSY
Hook
Boss A
Hook
Eject pinch roller R ASSY
Eject pinch roller L ASSY
Boss D
Boss C
Boss B
80°
Guide
Guide