Brother MFC-7240 - Low Voltage Power Supply PCB ASSY

3-56
Confidential
9.28 Low voltage power supply PCB ASSY
(1) Remove the earth spring front chute from the LVPS shield plate cover and the front
chute ASSY.
(2) Remove the hook part of the earth harness under R from the LVPS shield plate cover.
(3) Remove the three taptite bind B M4x12 screws, the screw pan (S/P washer) M3.5x6
screw and the screw pan (S/P washer) M3x12 DB screw to remove the LVPS shield
plate cover.
Fig. 3-44
Assembling Note :
• Hanging the earth spring front chute on the guide of the main frame R ASSY.
Guide
Main frame R ASSY
Earth harness under R
Earth spring front chute
LVPS shield plate cover
Screw pan (S/P washer) M3x12 DB
Taptite bind B M4x12
Screw pan (S/P washer) M3.5x6
Taptite bind B M4x12