Brother MFC-7240 - High Voltage Power Supply PCB ASSY

3-60
Confidential
9.30 High voltage power supply PCB ASSY
(1) Release the flat cable from the guides of the main frame R ASSY, and disconnect it from
the high voltage power supply PCB ASSY.
(2) Remove the taptite bind B M4x12 screw.
(3) Release the three hooks to remove the high voltage power supply PCB ASSY.
Fig. 3-49
Harness routing : Refer to "10. High voltage power supply PCB ASSY".
Assembling Note :
• Assemble the front cover sensor lever after assembling the high voltage power supply
PCB ASSY.
Flat cable
Front cover
sensor lever
Guide
Guide
High voltage power
supply PCB ASSY
Flat cable
Hook
Hooks
Main frame R ASSY
Taptite bind B M4x12