Brother MFC-7240 - New Toner Sensor PCB ASSY

3-61
Confidential
9.31 New toner sensor PCB ASSY
(1) Rotate the machine 180 degrees to the side of main frame L ASSY.
(2) Disconnect the new toner sensor harness from the main PCB ASSY, and release it from
the guide of the main frame L ASSY.
(3) Remove the taptite bind B M3x10 screw.
(4) Release the hook to remove the new toner sensor PCB ASSY.
Fig. 3-50
Harness routing : Refer to "3. New toner sensor PCB ASSY".
Taptite bind B M3x10
New toner sensor harness
New toner sensor PCB ASSY
New toner sensor
harness
Guide
Main PCB ASSY
Main PCB ASSY
Hook
New toner sensor
PCB ASSY
Main frame L ASSY