Brother MFC-7240 - Detailed Description of Maintenance-Mode Functions; EEPROM Parameter Initialization (Function Code: 01, 91)

5-3
Confidential
1.3 Detailed Description of Maintenance-mode Functions
1.3.1 EEPROM parameter initialization (Function code: 01, 91)
<Function>
This function is used to initialize the setting values of the operation parameters, user switches,
and worker switches (WSW) registered in the EEPROM.
Entering function code 01 initializes most EEPROM areas. Meanwhile, entering function code
91 initializes only the specified areas as shown in the table below.
<Operating Procedure>
(1) Press the [0] and [1] buttons (or the [9] and [1] buttons according to your need) in this
order in the initial state of the maintenance mode. "PARAMETER INIT" appears on the
LCD.
(2) Upon completion of parameter initialization, the machine returns to the initial state of the
maintenance mode.
Data item Function code 01 Function code 91
Counter information These will not be
initialized.
These will not be
initialized.
Error History
MAC Address (Ethernet Address)
Operation lock of the control panel
password
These will be
initialized.
Secure function lock
Worker switch
Telephone function registration
One-touch dialing
Speed dialing
Group dialing
User switches (items to be initialized when
resetting to the factory default settings)
These will be
initialized.
Function settings except user switches
(items except the factory default settings)
- Languages
- Reprint
- Secure Print
- Interfaces
LAN area (Network settings)
PCL core area (Emulation settings)
Note:
• Function code 01 is for service personnel. Function code 91 is for user support.