Brother MFC-8440 - Scan to Image

NETWORK SCANNING 8 - 8
Scan to Image
When you select Scan to Image your document will be scanned and
sent directly to the PC you designated on your network.
ControlCenter2.0 will activate the default graphics application on the
designated PC. You can change the
Scan
configuration. (See Scan
to Image:
on page 4-12.)
1
Place the document face up in the ADF, or face down on the
scanner glass.
2
Press
Scan
.
3
Press or to select
Scan to Image
.
Press
Set
.
4
Press or to select a
destination you want to send to.
Press
Set
.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press
Set
.
The machine will start the scanning process.
▲
Scan to E-Mail
Scan to Image
Scan to OCR
▼
Scan to File
Select
▲▼
& Set