Brother MFC-8440 - Page 117

6 - 17 SETUP SEND
4
Enter the next number.
(Example: Speed-Dial number)
5
When the LCD displays the fax number of the other party, press
Set
.
6
Enter another fax number.
(Example: Manual dialing using the dial pad.)
7
Press
Start
.
If you are using the scanner glass, go to Step 8.
8
To send a single page,
press
2
(or press
Start
again).
The MFC starts sending the fax.
—OR—
To send more than one page, press
1
and go to Step 9.
9
Place the next page on the scanner glass.
Press
Set
.
The MFC starts scanning and returns to Step 8. (Repeat Step 8
and 9 for each additional page).