Brother MFC-8440 - Memory Security; Setting up the Password

SETUP SEND 6 - 22
Memory Security
Memory Security lets you prevent unauthorized access to the MFC.
You will not be able to continue to schedule Delayed Faxes or Polling
jobs. However, any pre-scheduled Delayed Faxes will be sent when
you turn Memory Security
On,
so they won't be lost.
If Fax Storage is
On
before you turn Memory Security
On
, then Fax
Forwarding and Remote Retrieval will continue to work.
While Memory Security is
On
the following operations are available:
■
Receiving faxes into memory (limited by memory capacity)
■
Fax Forwarding (If Fax Storage was already
On
)
■
Remote Retrieval
While Memory Security is
On
the following operations are NOT
available:
■
Sending faxes
■
Printing received faxes
■
Copy
■
PC printing
■
PC scanning
Setting up the password
1
Press
Menu
,
2
,
0
,
1
.
2
Enter a 4-digit number for the
password.
Press
Set
.
If you are entering the password for the first time, the LCD
shows
Verify
.
3
Re-enter the password.
Press
Set
.
To print the faxes in memory, turn Memory Security
Off
.
If you forget the Memory Security password, please call Brother
Customer Service. (See For Customer Service on page i.)
20.Miscellaneous
1.Mem Security
New Passwd=xxxx
Enter & Set Key