Brother MFC-8440 - How to Access the Scanner

HOW TO SCAN USING WINDOWS
®
13 - 2
How to access the Scanner
1
Open the software application (ScanSoft
®
PaperPort
®
) to scan
a document.
2
Select Scan from the File drop-down menu or select the Scan
button. The Scan pane appears in the left panel.
3
Select
Brother MFC-8840D, Brother MFC-8840D USB
or
Brother
MFC-8840D LAN
from the Scanner drop-down list box.
4
Click
Scan
.
The Brother MFC-8840D, Brother MFC-8840D USB or
Brother
MFC-8840D LAN Scanner Setup dialog box will appear:
The instructions for scanning in this Guide are for when you use
ScanSoft
®
PaperPort
®
8.0SE.
If the MFC is connected via:
Parallel - use 'Brother MFC-8520D'
USB - use 'Brother MFC-8840 USB'
LAN - use 'Brother MFC-8840D LAN'