Brother MFC-8440 - Windows NT WS 4.0; Using the Brother Control Center for Windows; 98;98 Se;Me;2000 Professional and Windows NT; Brother MFL-Pro Control Center

14 - 1
USING THE BROTHER CONTROL CENTER FOR WINDOWS
®
98/98SE/ME/2000 PROFESSIONAL AND WINDOWS NT
®
WS 4.0
14
Brother MFL-Pro Control Center
The Brother Control Center is a software utility that pops up on the
PC screen whenever paper is put in the ADF of the MFC. This allows
you to quickly and with very few mouse clicks, to access the most
frequently used scanning applications. Using the Control Center
stops the need to manually startup any specific applications.
The Brother Control Center provides three operations (Scan, Copy
and PC-Fax):
■
Scan directly to a file, E-mail, word processor or graphic
application of your choice
■
Copy
■
PC Faxing using the Brother PC-FAX software
Using the Brother Control Center
for Windows
®
98/98SE/Me/2000
Professional and Windows NT
®
WS 4.0
If you are using Windows
®
2000 Professional or Windows NT
®
4.0, we recommend that you are logged on with administrator
rights.