USING BROTHER PC-FAX SOFTWARE 17 - 18
Setting up PC-FAX receiving
(Windows
®
98/98SE/Me/2000 Professional
and Windows NT
®
WS 4.0 only)
Running PC-FAX Receiving
From the Start menu, select Programs, Brother, MFL-Pro Suite
MFC-8840D and then select ‘PC-FAX Receiving’.
The PC-FAX icon will appear on your PC Task
bar for this Windows
®
session.
Setting up your PC
1
Right-click the PC-FAX icon on your PC
Task Bar, and then click PC-Fax RX Setup.
2
The PC-Fax RX Setup dialog box will appear:
3
In Ring Delay, select the number of rings before you want your
PC to answer Incoming calls.
4
In Save file to, use the Browse button if you want to change the
path where PC-FAX files will be saved.s
5
In File Format, select .tif or .max for the format the received
document will be saved in. The default format is .tif.
6
If you want to, you can check the Play wave file when
receiving FAX check box, and then enter the path.
7
To load PC FAX receiving automatically when you start up
Windows
®
, select the Add to Startup folder check box.
To Next Page
Loading...
