Brother MFC-8440 - Back View

INTRODUCTION 1 - 4
■
Back view
No. Name Description
12 Paper Adjustment Lever for
Duplex Printing
(MFC-8840D and
MFC-8840DN)
Use to match your paper size for duplex
printing.
13 Duplex Tray
(MFC-8840D and
MFC-8840DN)
Slide out to remove paper jammed inside
the MFC.
14 AC Power Connector Connect the AC Power Connector here.
15 Face-up Output Tray
(Back Output Tray)
Open it when thicker paper is placed in the
MP tray or Manual feed tray.
16 ADF Cover Open to remove paper jammed inside the
ADF unit.
17 Telephone Line Jack Plug the line cord supplied with the
MFC into
here.
18 USB Interface Connector Connect the USB Cable here.
19 Parallel Interface Connector Connect the Parallel Cable here.
20 External Telephone Line Jack Plug in the modular plug on the external
telephone line here.
15 Face-up Output Tray
(Back Output Tray)
14 AC Power Connector
13 Duplex Tray
(MFC-8840D and
MFC-8840DN)
16 ADF Cover
17 Telephone Line Jack
12 Paper Adjustment Lever
for Duplex Printing
(MFC-8840D and MFC-8840DN)
18 USB Interface
Connector
19 Parallel Interface
Connector
20 External Telephone
Line Jack