18 - 30 USING YOUR MFC WITH A MACINTOSH
®
MFC Remote Setup (Mac OS
®
X)
The MFC Remote Setup application allows you to quickly set up your
MFC by taking advantage of the ease and speed of programming on
your Macintosh
®
. When you access this application, the settings on
your MFC will be downloaded automatically to your Macintosh
®
and
displayed on your computer screen. If you change the settings, you
can upload them directly to the MFC.
OK
This starts the process of uploading the data to the MFC and exiting
the remote setup program. If an error message is displayed enter the
correct data again. Click OK.
Cancel
This exits the remote setup application without uploading the data to
the MFC.
Apply
This uploads the data to the MFC, but does not exit the remote setup
application.
Print
This command prints the selected items on the MFC. You can not
print the data until it is uploaded to the MFC. Click Apply to upload
the new data to the MFC and click Print.
The ‘MFC Remote Setup’ application icon is in Macintosh
HD/Library/Printers/Brother/Utility.
To Next Page
Loading...
