Brother MFC-8440 - Getting Started; Initial Setup; Setting the Date and Time

GETTING STARTED 4 - 1
4
Initial Setup
Setting the Date and Time
Your MFC displays the date and time and if you set up the Station ID it
prints on every fax you send.
If there is a power failure, you may have
to reset the date and time. All other settings will not be affected.
1
Press
Menu
,
0
,
2
.
2
Enter the last two digits of the year.
Press
Set
.
3
Enter two digits for the month.
Press
Set
.
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Press
Set
.
(For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Press
Set
.
(For example, enter 15:25 for 3:25 P.M.)
6
Press
Stop/Exit
. The LCD now shows the date and time
whenever the MFC is in Standby mode.
Getting started
02.Date/Time
Year:20XX
Enter & Set Key