Name: Brother MFC-8480DN - B/W Laser - All-in-One
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

7-1

Confidential

1. ENTRY INTO THE MAINTENANCE MODE

Press the [Menu] and [Start] buttons. Next press the [ ] button four times to make the

machine enter the maintenance mode.

The machine beeps for approx. one second and displays " " on the

LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which

the machine is ready to accept entry from the buttons.

To select one of the maintenance-mode functions listed in "2. LIST OF MAINTENANCE-

MODE FUNCTIONS", press the [ ] button or [ ] button to display any function code on the

LCD. Then press the [OK] button.

(The details of each maintenance-mode function are described in "4. DETAILED

DESCRIPTION OF MAINTENANCE-MODE FUNCTIONS".)

TIP:

• FAX models equipped with numerical keypads can enter the maintenance mode in

the same way as conventional models; that is, by pressing the [Menu] button, [*],

[2], [8], [6] and [4] keys in this sequence.

Note:

• To exit from the maintenance mode and switch to standby, press the [9] key twice in

the initial stage of the maintenance mode.

• Pressing the [Stop/Exit] button after entering only one digit restores the machine to

the initial stage of the maintenance mode.

• If an invalid function code is entered, the machine resumes the initial stage of the

maintenance mode.

Other manuals for Brother MFC-8480DN - B/W Laser - All-in-One

Questions and Answers:

Need help?

Do you have a question about the Brother MFC-8480DN - B/W Laser - All-in-One and is the answer not in the manual?

General