Brother MFC-8710DW - Page 172

160
7.Network
(MFC-8910DW)
(Continued)
2.WLAN
(Continued)
1.TCP/IP
(Continued)
7.WINS Server — Primary
[000-255].
[000-255].
[000-255].
[000-255]
Secondary
[000-255].
[000-255].
[000-255].
[000-255]
Specifies the IP
address of the
primary or
secondary WINS
server.
See .
8.DNS Server — Primary
[000-255].
[000-255].
[000-255].
[000-255]
Secondary
[000-255].
[000-255].
[000-255].
[000-255]
Specifies the IP
address of the
primary or
secondary DNS
server.
9.APIPA — On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
0.IPv6 — On
Off*
Enable or Disable
the IPv6 protocol. If
you want to use the
IPv6 protocol, visit
http://solutions.
brother.com/ for
more information.
2.Setup Wizard — — — You can configure
your internal print
server.
3.WPS/AOSS — — — You can easily
configure your
wireless network
settings using the
one-button push
method.
4.WPS w/PIN Code — — — You can easily
configure your
wireless network
settings using
WPS with a PIN
code.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.