148
7.Network
(MFC-8710DW)
(Continued)
1.Wired LAN
(Continued)
3.Wired Status
——
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
You can see the
current wired
status.
See .
4.MAC Address
——— Shows the MAC
address of the
machine.
5.Set to Default
——1.Reset
2.Exit
Restore the wired
network setting to
factory default.
6.Wired Enable
——On*
Off
Enable or Disable
the Wired LAN
manually.
2.WLAN 1.TCP/IP
1.Boot Method
— Auto*
Static
RARP
BOOTP
DHCP
Chooses the
BOOT method that
best suits your
needs.
(IP Boot
Tries)
— 00003*
[00000-32767]
Specifies the
number of
attempts the
machine will try to
obtain an IP
address when the
Boot Method is
set to any setting
except Static.
2.IP Address
— [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP
address.
3.Subnet Mask
— [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.
LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/
.
Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.
To Next Page
Loading...
