Brother MFC-8810DW - Page 163

Menu and features
151
C
7.Network
(MFC-8710DW)
(Continued)
2.WLAN
(Continued)
6.MAC Address — — — Shows the MAC
address of the
machine.
See .
7.Set to Default ——1.Reset
2.Exit
Restore the
wireless network
settings to factory
default.
8.WLAN Enable ——On
Off*
Enable or disable
the wireless LAN
manually.
3.Wi-Fi Direct 1.Push Button — — — You can easily
configure your
Wi-Fi Direct™
network settings
using the one-
button push
method.
See .
2.PIN Code — — — You can easily
configure your
Wi-Fi Direct™
network settings
using WPS with a
PIN code.
3.Manual — — — You can manually
configure your
Wi-Fi Direct™
network settings.
4.Group Owner ——On
Off*
Sets your machine
as the Group
Owner.
5.Device Info. 1.Device Name — — You can see the
device name of
your machine.
2.SSID — — Shows SSID of
Group Owner.
When the machine
is not connected,
LCD shows
Not Connected.
3.IP Address — — You can see the
current IP Address
of your machine.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/
.
 The factory settings are shown in Bold with an asterisk.
 LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
 To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/
.
 Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.