152
7.Network
(MFC-8710DW)
(Continued)
3.Wi-Fi Direct
(Continued)
6.Status Info.
1.Status —
G/O Active(**)
Client Active
Not Connected
Off
Wired LAN Active
** = the number
of devices
You can see the
current Wi-Fi
Direct™ network
status.
See .
2.Signal — Strong
Medium
Weak
None
You can see the
current Wi-Fi
Direct™ network
signal strength.
When your
machine acts as
Group Owner, the
LCD always shows
Strong.
7.I/F Enable
——On
Off*
Enable or Disable
the Wi-Fi Direct™
connection.
(
4.E-mail/
IFAX
)
1.Mail Address
— — — Enter the E-mail
address. (Up to 60
characters)
See .
2.Setup Server
1.SMTP
1.SMTP Server
Name
(Up to 64
characters)
IP Address
[000-255].
[000-255].
[000-255].
[000-255]
Enter the SMTP
server address.
2.SMTP Port
25*
[00001-65535]
Enter the SMTP
port number.
3.Auth. for SMTP
None*
SMTP-AUTH
POP bef.SMTP
Selects the
Security method
for E-mail
notification.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.
LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/
.
Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.
To Next Page
Loading...
