Home > Scan > Scan Using the Scan Button on Your Machine > Web Services for Scanning on Your
Network (Windows 7, Windows 8.1, Windows 10, and Windows 11) > Use the Web Services Protocol to
Install the Scanner Driver (Windows 7, Windows 8.1, Windows 10, and Windows 11)
Use the Web Services Protocol to Install the Scanner Driver (Windows
7, Windows 8.1, Windows 10, and Windows 11)
• Make sure you have installed the correct software and drivers for your machine.
• Verify that the host computer and the Brother machine are on the same subnet, or that the router is
correctly configured to pass data between the two devices.
• You must configure the IP address on your Brother machine before you configure this setting.
1. Hold down the key and press the key on the computer's keyboard to launch Run.
2. Type control printers in the Open: field and click OK.
3. Click Add a device
• The Web Services Name for the Brother machine is your model's name and the MAC Address.
• Windows 8.1/Windows 10/Windows 11
Move your mouse over the machine's name to display the machine's information.
4. Do one of the following:
• Windows 8.1/Windows 10/Windows 11
Select the machine you want to install, and then follow the on-screen instructions.
• Windows 7
Click Install in the displayed menu.
To uninstall the drivers, click Uninstall or (Remove device).
Related Information
• Web Services for Scanning on Your Network (Windows 7, Windows 8.1, Windows 10, and Windows 11)
98
To Next Page
Loading...
