Brother MFC-J200 - Fax Resolution

106
Fax Resolution ( ) C
0.Initial Setup
(Continued)
6.Reset
(7.Reset (For
South Africa))
1.Machine Reset 1.Reset 2.Exit You can reset the
machine’s settings, such
as the Date and Time and
Ring Delay.
95
2.Network
1.Reset 2.Exit Resets the print server
back to the factory
defaults, such as the
password and IP address
information.
3.Address&Fax
1.Reset 2.Exit Deletes all stored
Speed Dial numbers and
faxes, restores the
Station ID, Speed Dial
List, Transmission
Verification Report and
Fax Journal back to the
factory default settings.
4.All Settings 1.Reset 2.Exit Resets all the machine’s
settings back to the
factory default.
0.Local Language
(depending on
your country)
— (Choose the
language you
want to use)
Allows you to change the
LCD language for your
country.
See .
Level1 Level2 Level3 Options Descriptions Page
———Standard*
Fine
S.Fine
Photo
Sets the resolution for
outgoing faxes.
See .
See Advanced User’s Guide.
The default settings are shown in Bold with an asterisk.
Level1 Level2 Level3 Options Descriptions Page
See Advanced User’s Guide.
See Quick Setup Guide.
The default settings are shown in Bold with an asterisk.