Brother MFC-J200 - Basic Operations

Chapter 1
8
8 Stop/Exit
Stops an operation or exits the menu.
9Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
10 Fax Resolution
Lets you temporarily change the resolution
when sending a fax.
Basic Operations 1
The following steps show how to change a
setting in the machine. In this example, the
Receive Mode setting is changed from
Fax Only to Fax/Tel.
a Press (FAX).
b Press Menu, 3, 1, 1.
Fax Only
Select ab &OK
c Press a or b to choose Fax/Tel.
Fax/Tel
d Press OK.
Accepted
NOTE
Press Clear if you want to go back to the
previous level.
e Press Stop/Exit.