Brother MFC-L8600CDW - Cleaning the Scanner Glass

Routine maintenance
109
A
e Remove anything that is stuck inside the
paper tray.
f Wipe the inside and the outside of the
paper tray with a dry, lint-free cloth to
remove dust.
g Re-load the paper and put the paper tray
firmly back in the machine.
h Turn on the machine.
Cleaning the scanner glass A
a Press and hold down to turn the
machine off.
b (MFC-L8850CDW and MFC-L9550CDW)
Unfold the ADF document support (1)
and then open the ADF cover (2).
Clean the white bar (3) and the scanner
glass strip (4) underneath it with a soft
lint-free cloth gently moistened with water.
Close the ADF cover (2) and fold the
ADF document support (1).
c Lift the document cover (1).
Clean the white plastic surface (2) and
scanner glass (3) underneath it with a
soft lint-free cloth gently moistened with
water.
3
4
1
2
3
2
1