Brother MFC-L8850CDW - Page 496

7-39
Confidential
(40) Release the three Hooks 1. Release the other seven Hooks and remove the Joint cover
base ASSY from the Main body.
Fig. 7-71
(41) Remove the six Taptite bind B M4x12 screws and four Taptite cup S M3x6 SR screws,
and remove the Scanner cover plate from the Main body.
Fig. 7-72
Assembling Note:
When assembling the six screws of the Taptite bind B M4x12, be sure to assemble
them in the order shown in the figure.
Hook 1
Hook
Hook
Hook
Hook
Main body
<Front side>
Joint cover base ASSY
1
2
3
4
5
6
Taptite bind B M4x12
Taptite cup S
M3x6 SR
<Front side>
Main body
Scanner cover plate
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
Taptite bind B M4x12
Taptite bind B M4x12
Taptite bind B M4x12