9. If your LCD error message was [Jam Front/MP Tray] or [Repeat Jam Front/MP Tray], make sure
you look carefully inside the MP tray for jammed paper. Push the release lever (1) towards the back of the
machine, and then slowly pull the jammed paper out of the MP tray.
10. If your LCD error message was repeat paper jam messages, for example [Repeat Jam Front/Rear],
and you removed the paper support, put it firmly back in the machine. Make sure you fit the paper support
into the channels.
11. Slowly push Tray #1 completely into the machine.
12. Reconnect the power cord.
If there is a repeat paper jam, a small piece of paper may be stuck in the machine.
See Related Information: Remove Paper Scraps.
Related Information
• Printer Jam or Paper Jam
Related Topics:
• Transfer Your Faxes or Fax Journal Report
• Error and Maintenance Messages
• Remove Paper Scraps
482
To Next Page
Loading...
