7. Keep the nozzle close to the ink tank opening and turn the nozzle up and remove the bottle from the ink tank
so that the ink does not spill.
8. Replace the nozzle cap.
NOTE
• If any ink remains in the ink bottle, seal the cap tightly and store the ink bottle upright on a level
surface in a cool, dark place.
• Avoid tilting the ink bottle or storing it on its side; it may leak.
9. Push down on the cap of the ink tank to close it tightly.
10. Repeat these steps for each ink tank you want to refill.
11. Close the ink tank cover.
When you open and close the ink tank cover, a message may appear on the LCD to verify whether the ink tanks
were refilled.
• If you refilled the ink tanks, press [Yes], and press [Yes] to reset the ink dot counter for the refilled colours.
• If you did not refill the ink tank, be sure to press [No].
521
To Next Page
Loading...
