82
LENGTH
LIMIT!
• This message appears if the
text is longer than 1 meter
when you try to print.
• Shorten the text to less
than 1 meter before trying
to print.
• This message appears if
the Length function is used
to set a label length that is
less than 4.0 cm or more
than 30.0 cm.
• Set the label length
between 4.0 cm and 30.0
cm.
• This message appears if
the Tab Length function is
used to set a tab length
that is more than 30.0 cm.
• Set the tab length so that it
is less than 30.0 cm.
LINE
LIMIT!
• This message appears if
the number of lines in the
text is greater than the
maximum number of lines
possible for the installed
tape.
• Reduce the number of
lines or install a tape of
greater width.
MEMORY
FULL!
• This message appears if
you try to store a text file
after 300 characters have
already been stored in the
memory.
• Delete an unwanted file to
make room for the new
one.
NO
FILES!
• This message appears if
you try to recall or delete a
text file from the memory
when none are stored.
• Store a text file first.
NOT
HERE!
• This message appears if
the cursor is at the end of
the text when you hold
down and press
.
• Move the cursor below a
number before holding
down and press-
ing .
Error Message Cause Remedy
Code
Number
O
ö
Code
Number
O
ö
To Next Page
Loading...
