EasyManua.ls Logo

Brother P-Touch 1800 - Batteries

Brother P-Touch 1800
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
BATTERIES
This lightweight and portable machine can be used anywhere by installing six (6)
AA
alkaline batteries
. When you change the batteries, always replace all six at the same
time.
To change the batteries:
1
Remove the battery compartment cover on the back of the machine.
2
If batteries are already installed, remove them.
3
Insert six new AA alkaline batteries, making sure that they face the correct direction.
4
Attach the battery compartment cover.
Be sure to insert the new batteries within five minutes of removing the old
ones, otherwise the text shown in the display and any text files stored in the
memory will be lost (unless the machine is plugged into an AC outlet with
the AC adapter).
Remove the batteries and disconnect the AC adapter if you do not intend to
use this machine for an extended period of time. When the power is discon-
nected, all text shown in the display and stored in the memory will be lost.
If alkaline batteries are not used, large fonts cannot be printed.

Related product manuals