BEFORE USING YOUR P-TOUCH
4
P-touch
Follow these guidelines to avoid fire, damage, electric shock, and choking.
Do not allow the P-touch to get wet in
any way.
Do not touch any metal parts near the
print head. The print head becomes
very hot during use and remains very
hot immediately after use. Do not
touch it directly with your hands.
Do not use the P-touch with a foreign
object in it. If water, metallic
substance or any foreign object
enters the P-touch, disconnect the
AC adaptor and remove batteries,
and contact the retail outlet where the
P-touch was purchased or your local
authorized service center.
Do not disassemble the P-touch. For
inspection, adjustment, and repair of
the P-touch, contact the retail outlet
where the P-touch was purchased or
your local authorized service center.
Dispose of plastic bags correctly and
keep away from babies and children.
Do not wear or play with plastic bags.
Disconnect the AC adaptor and
remove batteries immediately and
stop using when you notice abnormal
odor, heat, discolouration,
deformation or anything unusual
while using or storing it.
Do not drop, hit or otherwise bang the
P-touch.
WARNING
Print head
To Next Page
Loading...
