Brother P-Touch 2100 - LCD Display; LCD Contrast

1
2
3
4
5
6
7
8
9
23
z GETTING STARTED
LCD Display
LCD Contrast
You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0,
-1, -2) to make the screen easier to read. The default setting is "0".
Press the key to display the Setup menu, select
"LCD Contrast" using the or key, and then press
the or key.
Select a contrast level using the or key.
The screen contrast changes each time you press the
or key, allowing you to set the most suitable
contrast.
Press the or key.
LCD Display
1
2
3
• Press the key to return to the previous step.
• Pressing the key on the contrast setting screen sets the contrast to the default value
"0".