101
LINE
LIMIT!
• This message appears if the
number of lines in the text is
greater than the maximum
number of lines possible for
the installed tape.
• Reduce the number of lines
or install a tape of greater
width.
MEMORY
FULL!
• This message appears if you
try to store a text file after
2500 characters have already
been stored in the memory.
• Delete an unwanted file to
make room for the new one.
NO
FILES!
• This message appears if you
try to recall or delete a text
file from the memory when
none are stored.
• Store a text file first.
NO
TAPE!
• This message appears if you
hold down and press
or try to print a label or
feed the tape when no tape
cassette is installed.
• Install a tape cassette and try
again.
REPLACE
BATTERIES!
• This message appears if the
installed alkaline batteries
are about to run out.
• Replace the batteries or use
the AC adaptor.
ROM
PROBLEM!
• This message appears if there
is a problem with the
machine’s read only mem-
ory.
• Contact your service repre-
sentative.
SET 1” TAPE!
SET 24mm
TAPE!
• This message appears if a 1”
(24-mm)-wide tape cassette
is not installed when a layout
for 1” (24-mm)-wide tape is
selected.
• Install a 1” (24-mm)-wide
tape cassette.
SET 3/4”
TAPE!
SET 18mm
TAPE!
• This message appears if a
3/4” (18-mm)-wide tape cas-
sette is not installed when a
layout for 3/4” (18-mm)-wide
tape is selected.
• Install a 3/4” (18-mm)-wide
tape cassette.
Error Message Cause Solution
CodeCode
Length
T
Length
T
To Next Page
Loading...
