102
SET 1/2”
TAPE!
SET 12mm
TAPE!
• This message appears if a
1/2” (12-mm)-wide tape cas-
sette is not installed when a
layout for 1/2” (12-mm)-wide
tape is selected.
• Install a 1/2” (12-mm)-wide
tape cassette.
SET 3/8”
TAPE!
SET 9mm
TAPE!
• This message appears if a
3/8” (9-mm)-wide tape cas-
sette is not installed when a
layout for 3/8” (9-mm)-wide
tape is selected.
• Install a 3/8” (9-mm)-wide
tape cassette.
SET 1/4”
TAPE!
SET 6mm
TAPE!
• This message appears if a
1/4” (6-mm)-wide tape cas-
sette is not installed when a
layout for 1/4” (6-mm)-wide
tape is selected.
• Install a 1/4” (6-mm)-wide
tape cassette.
SYSTEM
ERROR!
• This message appears if there
is a problem with the
machine’s software.
• Contact your service repre-
sentative.
TAB
LIMIT!
• This message appears if 50
tabs have already been added
to the text when you hold
down and press .
• Limit the number of tabs in
the text to 50.
TEXT
TOO HIGH!
• This message appears if the
size of the text is larger than
the width of the installed
tape.
• Reduce the size of the char-
acters or install a wider tape.
Error Message Cause Solution
CodeCode
Tab
Q
Tab
Q
To Next Page
Loading...
