101
ERROR MESSAGE LIST
Error Message Cause Solution
7 LINE
LIMIT!
• This message appears if
seven lines already exist
when you press , or
you delete to join two
blocks, causing the block to
exceed seven lines.
• Limit the number of lines in a
block to seven.
1 BARCODE
PER BLOCK!
• This message appears if a
barcode has already been
added to the block when you
hold down and press
.
• Limit the number of barcodes
in a block to one.
4 DIGIT
MIN.!
• This message appears when
less than the minimum four
digits are entered as barcode
data.
• Enter the minimum of four
digits before pressing .
5 BLOCK
LIMIT!
• This message appears if five
blocks already exist when
you hold down and
press .
• Limit the number of blocks in
the text to five.
BATTERIES
WEAK!
• This message appears when
the installed alkaline batter-
ies become weak.
• Replace the batteries or use
the AC adapter.
BUFFER
EMPTY!
• This message appears if you
hold down and press
, but no text has been
entered in the display.
• Enter some text before start-
ing the function.
• This message appears if you
try to print, but no text has
been entered.
• Enter text before printing.
New Block
Code
Barcode
I
New Block
Code
New Block
Code
Length
T
To Next Page
Loading...
