Brother P-Touch 2400 - Mirror Printing Function

78
FRAME FUNCTION
With the Frame function, you can choose from various frames and highlights to make more
decorative or emphasised text.
The following frame settings are available:
OFF, SQUARE, ROUND, NAMEPLATE, TELEPHONE, DOG, CAT, HANDS, CANDY,
BANNER, AIRPLANE, VINE, FLOWERS, DOT, DIAMOND and SLANT
The default frame setting is OFF; however, 15 other settings are also available. When any set-
ting other than OFF is selected, the ABC
/ indicator on the right side of the display lights
up.
Refer to
Reference at the end of this section for samples of the available settings.
To change the frame setting:
1 While holding down , press once, and keep held down to display the
current frame setting.
2 While still holding down , continue pressing until the desired frame setting is
displayed.
☞ The ABC/ indicator lights up when any setting other than OFF is selected.
3 Release to apply the selected frame setting to the text.
EXAMPLE
To select the BANNER frame setting:
1 While holding down , press
once, and keep held down.
2 While still holding down , con-
tinue pressing until BANNER is dis-
played.
3 Release .
ABC
Code
é
=
6
ABC
Code
Code
é
=
6
ABC
ABC
Code
OFF
FRAME
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
Code
é
=
6
ABC
Code
BANNER
FRAME
Alt
Caps
Length
A / F
ABC / ABC
Length
Width
Code
é
=
6
ABC
Code